Patient Monitor Cable Hook Attachment with CO2 Sensor Mount (4-Hook Cord Organizer)

The Problem

Every patient monitor trails a bundle of cables: ECG leads, SpO2, temperature probes, NIBP lines. Between patients they need to live somewhere, and in most clinics that somewhere is a stick-on hook or cable wrap stuck to the back of the monitor. The adhesive peels in a warm treatment area, the hooks end up at whatever angle they were pressed on at, and the cables hang out of sight behind the screen where they tangle and collect dust.

When you need a lead in a hurry, you are reaching around the back of a monitor and untangling by feel.

The sidestream CO2 module has the same problem. It ships with no mounting hardware, so it dangles from its cable somewhere behind the monitor.

The Solution

The VetBog Cable Hook Attachment puts four hooks directly below the patient monitor, on the front side where you work. It slides into the base of a Pryor Products monitor mount, wall mount or treatment tower, and docking the Midmark 8019 series monitor onto the arm locks it in place. No screws, no adhesive, nothing stuck to your equipment.

Coil each cable onto its own hook and every lead hangs visible and within reach, right under the screen. Grab what you need without moving the monitor or fishing behind it.

Included CO2 Sensor Mount

Each attachment comes with a CO2 sensor mount that integrates into the back of the hook attachment. This is a separate, modified version of the mount, designed specifically to connect to the hook attachment rather than to the monitor itself. It is not interchangeable with our standalone CO2 sensor mount, which bolts to the monitor’s rear panel. It gives the sidestream CO2 module a fixed cradle behind the monitor, with the sampling line routed down to the hooks alongside the other cables.

It’s optional. If you don’t run capnography on that monitor, leave it off and the hook attachment works exactly the same. Add it whenever you need it. Both pieces are included in the price, and no extra parts are needed to fit them together.

What’s in the Box

• 1x Cable Hook Attachment (4 hooks)
• 1x CO2 Sensor Mount, modified to connect to the hook attachment (not the standalone version)

Installation

1. If you want the CO2 sensor mount, fit it onto the back of the hook attachment
2. Slide the attachment into the base of the monitor mount
3. Attach the patient monitor onto the mount arm as normal
4. The docked monitor locks the attachment into place

No tools, screws, adhesive, or extra hardware needed.

Care & Cleaning

Wipe down with your standard surface cleaner as needed. Not autoclave-safe.

---

Accessory only. Pryor Products and Midmark are trademarks of their respective owners, used here only to describe compatibility. Not affiliated with or endorsed by Pryor Products, Midmark, or any CO2 sensor manufacturer.